// BUILT INTO IRONLEDGER //

Push Pull Legs split.

Push pull legs (PPL) splits training into three sessions: push (chest, shoulders, triceps), pull (back and biceps) and legs. Run six days a week, it trains every muscle twice; run three days, once. It suits lifters past the beginner stage who can train five or six days a week, and it is built into IronLedger in two versions.

Six days or threeEach muscle twice a weekStrength and sizeBuilt into IronLedger

Updated

// THE SPLIT //

What each day trains.

Muscles that work together are trained together, so a pressing day doesn’t tire the back you need for rows, and legs get a day to themselves.

The three push pull legs sessions
DayMusclesMain lifts in IronLedger’s version
PushChest, shoulders, tricepsBench press, overhead press, incline press, dips
PullBack, rear shoulders, bicepsDeadlift, pull-ups, rows, curls
LegsQuads, hamstrings, glutes, calvesSquat, Romanian deadlift, leg press, lunges

// THE SCHEDULE //

Three days or six.

The six-day version is the one most people mean by PPL. The rotating version leaves a rest day after every third session, so the week shifts.

Ways to run push pull legs
ScheduleThe weekEach muscle trained
Six daysPush A, Pull A, Legs A, Push B, Pull B, Legs B, restTwice a week
RotatingPush, Pull, Legs, rest, repeatEvery fourth day
Three daysPush, Pull, Legs on non-consecutive daysOnce a week

Twice a week, or enough sets?

A 2016 meta-analysis found training a muscle twice a week grew more than once. A larger 2019 analysis of 25 studies found that with the same weekly sets, frequency made little difference. The six-day split’s real advantage is room for more weekly sets.

More sets, more growth

Muscle growth rises with weekly sets in a graded dose-response, per a 2017 meta-analysis. For targets by muscle, see how many sets per muscle group.

Who it suits

The ACSM recommends 2 to 3 days a week for novices, 3 to 4 for intermediates and 4 to 5 for advanced lifters. Six days is a lot: it fits trained lifters with time to recover. Newer lifters may do better on a three-day full-body plan.

// THE WORKOUTS //

All six sessions.

The version built into IronLedger. The A sessions lean heavier, the B sessions toward size. RIR is reps in reserve: RIR 1 to 2 means stop with one or two good reps left.

Push A: strength emphasis, 18 working sets, about 50 to 65 minutes
ExerciseSets × repsRestEffort
Barbell bench press4 × 4–63 minRIR 1 to 2
Overhead press3 × 6–82.5 minRIR 1 to 2
Incline dumbbell press3 × 8–102 minRIR 1 to 2
Dumbbell lateral raise3 × 12–1560 sRIR 0 to 1
Triceps dips3 × 8–102 minRIR 1 to 2
Overhead triceps extension2 × 12–1560 sRIR 0 to 1
Pull A: strength emphasis, 20 working sets, about 55 to 70 minutes
ExerciseSets × repsRestEffort
Deadlift4 × 4–63.5 minRIR 1 to 2
Weighted pull-ups4 × 6–82.5 minRIR 1 to 2
Barbell row3 × 6–82.5 minRIR 1 to 2
Chest-supported row3 × 10–1290 sRIR 1 to 2
Face pulls3 × 15–2060 sRIR 0 to 1
Barbell curl3 × 8–1090 sRIR 0 to 1
Legs A: quad and strength emphasis, 20 working sets, about 55 to 70 minutes
ExerciseSets × repsRestEffort
Barbell back squat4 × 4–63 minRIR 1 to 2
Romanian deadlift3 × 8–102 minRIR 1 to 2
Leg press3 × 10–122 minRIR 1 to 2
Walking lunges3 × 10–1290 sRIR 1 to 2
Leg curl3 × 10–1260 sRIR 0 to 1
Standing calf raise4 × 12–1560 sRIR 0 to 1
Push B: hypertrophy emphasis, 21 working sets, about 45 to 60 minutes
ExerciseSets × repsRestEffort
Incline barbell press4 × 8–102 minRIR 1 to 2
Dumbbell bench press3 × 10–1290 sRIR 1 to 2
Machine shoulder press3 × 10–1290 sRIR 1 to 2
Cable lateral raise3 × 15–2045 sRIR 0 to 1
Cable flyes3 × 12–1560 sRIR 0 to 1
Triceps pushdown3 × 12–1560 sRIR 0 to 1
Overhead cable extension2 × 15–2045 sRIR 0 to 1
Pull B: hypertrophy emphasis, 21 working sets, about 50 to 65 minutes
ExerciseSets × repsRestEffort
Barbell row4 × 8–102 minRIR 1 to 2
Lat pulldown3 × 10–1290 sRIR 1 to 2
Seated cable row3 × 10–1290 sRIR 1 to 2
Single-arm dumbbell row3 × 10–1260 sRIR 1 to 2
Reverse pec deck3 × 15–2045 sRIR 0 to 1
Incline dumbbell curl3 × 12–1560 sRIR 0 to 1
Hammer curl2 × 12–1560 sRIR 0 to 1
Legs B: hamstring and glute emphasis, 22 working sets, about 55 to 65 minutes
ExerciseSets × repsRestEffort
Romanian deadlift4 × 8–102.5 minRIR 1 to 2
Front squat3 × 8–102 minRIR 1 to 2
Bulgarian split squat3 × 10–1290 sRIR 1 to 2
Leg extension3 × 12–1560 sRIR 0 to 1
Lying leg curl3 × 12–1560 sRIR 0 to 1
Hip thrust3 × 12–1560 sRIR 0 to 1
Seated calf raise3 × 15–2045 sRIR 0 to 1

Not sure how a set at RIR 1 to 2 should feel? The RPE and RIR chart lays out each rating.

// PROGRESSION //

How to add weight.

Work inside each rep range. When every set reaches the top of the range at the target effort, add the smallest load you can next time.

Double progression

Add reps first, then load. The ACSM suggests a 2 to 10% increase once you can do one or two reps more than the target. On most plates that is 2.5 kg or 5 lb on the big lifts.

Rate every set

Logging RPE or RIR shows whether a rep target was hit easily or barely. That is what makes the next decision honest rather than a guess.

Track the big lifts

Your estimated one-rep max from the 4 to 6 rep sets shows whether strength is rising week to week, even when the load on the bar hasn’t moved.

// IN IRONLEDGER //

Two ways to run it.

Both are on the Templates screen, and both run the six-day rotation above. They differ in who picks the weight.

Push/Pull/Legs Strength Bias: load and go

Tap LOAD. Six days a week for four weeks, with the sessions above. The first time you do a lift, the app uses the program’s preset load unless you already have history for it, so change it to yours on day one.

After that it recommends each next load from what you logged and shows the reason, using the rule written out here.

Push Pull Legs: set it up

Tap SET UP. Six days a week for six weeks. Before you start you can swap any exercise that has alternatives, such as a dumbbell or machine press for the barbell bench press.

There are no starting numbers: each lift’s first session is marked as a first time and you choose the load. The app shows the sets, reps and effort targets but does not work out the next weight; add load when you reach the top of the range.

What it doesn’t do yet

There is no three-day PPL template. Build one as a custom program, or import a spreadsheet and check it first with the program file checker. Every set logs weight, reps and RPE or RIR either way.

// DIRECT ANSWERS //

Questions lifters ask.

What is a push pull legs split?

A way of organising training by movement: one session for pushing muscles (chest, shoulders, triceps), one for pulling muscles (back, biceps, rear shoulders) and one for legs. Run twice through in six days, it trains every muscle twice a week; run once, three days a week, it trains each muscle once.

Is push pull legs good for beginners?

It can work, but most beginners do better on fewer sessions. The American College of Sports Medicine recommends 2 to 3 training days a week for novices and 3 to 4 for intermediates, so a six-day PPL suits lifters with some training behind them and the time to recover from it.

Is a 3-day push pull legs split enough?

It trains each muscle once a week. A 2016 meta-analysis found twice a week grew more muscle than once, but a larger 2019 analysis of 25 studies found that when weekly sets are equal, frequency makes little difference. Three days can work if each session fits enough sets per muscle; six days makes that easier.

Can you build strength on push pull legs?

Yes, if the heavy compound lifts stay in. The A sessions in IronLedger’s version put the bench press, deadlift and squat at 4 sets of 4 to 6. A 2018 meta-analysis found more frequent training gave bigger strength gains, but mainly because it added volume: with volume equal, frequency made no significant difference.

Should deadlifts go on pull day or leg day?

Either works. IronLedger’s version puts conventional deadlifts on Pull A and Romanian deadlifts on both leg days. What matters more is the total hinge work across the week, so count the deadlift and Romanian deadlift sets together.

How long does a push pull legs workout take?

IronLedger’s six sessions are 18 to 22 working sets each, and the app estimates 45 to 70 minutes, with longer rests on the heavy compound lifts.

Does IronLedger set the weights for me?

On Push/Pull/Legs Strength Bias, the load-and-go version, yes: after your first session of each lift it recommends the next load from what you logged, with the reason. The Push Pull Legs template you set up yourself shows the sets, reps and effort targets, and you choose the weight.

How the next load is chosen

On the load-and-go programs, every recommended load comes with where it came from and the reason. The rule is written down in full, with examples.

Read the rule

// KEEP READING //

Related reading.

PPL vs upper/lower

Which split fits your week, compared on frequency, volume and recovery.

The PPLUL split

Push, pull, legs, upper, lower: a five-day hybrid of the two.

Sets per muscle group

How much weekly volume each muscle needs, and how to count it.

Arnold Split

Chest with back, shoulders with arms, then legs, twice a week: all three workouts, with supersets and pyramids.

Upper Lower Split

Upper body one day, lower body the next, four days a week: all four workouts, with sets, reps and effort.

PHUL

Brandon Campbell’s Power Hypertrophy Upper Lower: two heavy days and two size days a week, all four workouts, and how PHUL differs from PHAT.

Starting Strength

Mark Rippetoe’s novice barbell program from the book: its stages, work sets and weight jumps, and workouts A and B as IronLedger runs them.

Mike Mentzer Heavy Duty

Mentzer’s high-intensity routine in his own words: two workouts every other day, a few sets to failure, pre-exhaust pairs.

Powerbuilding

Strength and size in one plan: heavy sets on the big lifts plus volume for growth, and three free programs built on it.

Dorian Yates Blood & Guts

Yates’s high-intensity method in his own words: two warm-up sets, then one all-out set to failure, on a four-day split.

StrongLifts 5x5

Two alternating full-body workouts, 5 sets of 5, three days a week, with a little more weight each time.

Greyskull LP

Johnny Pain’s linear progression: 2 sets of 5 and a set to failure, small jumps, and a planned reset when a lift stalls.

Madcow 5x5

The intermediate 5x5: medium, light and heavy days, sets that climb to a top set, and a new top set each week.

Texas Method

Volume Monday, light Wednesday, a new 5-rep max on Friday: the weekly program for lifters past novice gains.

GZCLP

Cody Lefever’s three-tier linear progression for newer lifters, with its built-in plan for stalls.

nSuns 5/3/1 LP

High-volume 5/3/1-style training, nine top sets and back-off sets a day, with a weekly training max increase.

Smolov and Smolov Jr

A squat specialisation block of about 13 weeks, and its three-week short version, from your max.

Sheiko Beginner

Three days a week of squat, bench press and deadlift at moderate percentages of your max, in preparation and competition blocks.