// BUILT INTO IRONLEDGER //

PHUL workout.

PHUL (Power Hypertrophy Upper Lower) is Brandon Campbell’s four-day program: two heavy power days with 3 to 5 reps on the main lifts, then two hypertrophy days at 8 to 12 reps. Every muscle is trained twice a week, for strength and size at once. It is built into IronLedger in two versions.

Four days a weekEach muscle twice a weekStrength and sizeBuilt into IronLedger

Updated

// THE WEEK //

Two power days, two for size.

Campbell’s schedule, which is also IronLedger’s default: two power days, a rest day, two hypertrophy days, then two days off. In the app, any four days work.

A PHUL week
DaySession
MondayUpper power
TuesdayLower power
WednesdayRest
ThursdayUpper hypertrophy
FridayLower hypertrophy
SaturdayRest
SundayRest

Power days

Heavy compound lifts for 3 to 5 reps: bench press, rows, squat and deadlift. A 2017 meta-analysis found heavy loads build more one-rep-max strength than light ones.

Hypertrophy days

Moderate weights for 8 to 12 reps with more isolation work. The same meta-analysis found muscle growth was similar across light and heavy loads when sets were taken close to failure.

Twice a week

Each muscle is trained on a power day and a hypertrophy day. Twice-weekly training produced more growth than once in a 2016 meta-analysis; with weekly sets equal, frequency mattered little for strength (2018).

// THE WORKOUTS //

All four sessions.

Brandon Campbell’s sets and reps, next to what IronLedger writes by default. Campbell asks for every set to end with at least one rep “left in the tank”; IronLedger’s target of 1 to 2 reps in reserve (RIR) matches.

Day 1: upper power
ExerciseCampbellIronLedger
Barbell bench press3–4 × 3–53 × 3–5
Incline dumbbell bench press3–4 × 6–103 × 6–10
Bent-over row3–4 × 3–53 × 3–5
Lat pulldown3–4 × 6–103 × 6–10
Overhead press2–3 × 5–82 × 5–8
Barbell curl2–3 × 6–102 × 6–10
Skullcrusher2–3 × 6–102 × 6–10
Day 2: lower power
ExerciseCampbellIronLedger
Squat3–4 × 3–53 × 3–5
Deadlift3–4 × 3–53 × 3–5
Leg press3–5 × 10–153 × 10–15
Leg curl3–4 × 6–103 × 6–10
Calf exercise (IronLedger: standing calf raise)4 × 6–104 × 6–10
Day 4: upper hypertrophy
ExerciseCampbellIronLedger
Incline barbell bench press3–4 × 8–123 × 8–12
Flat bench dumbbell flye3–4 × 8–123 × 8–12
Seated cable row3–4 × 8–123 × 8–12
One-arm dumbbell row3–4 × 8–123 × 8–12
Dumbbell lateral raise3–4 × 8–123 × 8–12
Seated incline dumbbell curl3–4 × 8–123 × 8–12
Cable triceps extension (IronLedger: pushdown)3–4 × 8–123 × 8–12
Day 5: lower hypertrophy
ExerciseCampbellIronLedger
Front squat3–4 × 8–123 × 8–12
Barbell lunge3–4 × 8–123 × 8–12 each leg
Leg extension3–4 × 10–153 × 10–15
Leg curl3–4 × 10–153 × 10–15
Seated calf raise3–4 × 8–123 × 8–12
Calf press3–4 × 8–123 × 8–12

IronLedger writes the lower number of each of Campbell’s set ranges, so add a set where you have the time and recover well; Campbell himself suggests starting with less volume until you are used to the workload, and doing ab work at the end of a session or on a day off. Neither he nor the app sets rest times: the ACSM position stand suggests 3 to 5 minutes between heavy sets and 1 to 2 minutes for hypertrophy work. Not sure what RIR 1–2 feels like? The RPE and RIR chart lays it out.

// PHUL VS PHAT //

Four days or five.

PHAT is Layne Norton’s Power Hypertrophy Adaptive Training. It also opens the week with an upper and a lower power day, then adds a fifth training day.

PHUL compared with PHAT
PHULPHAT
Days a weekFourFive
Power daysUpper and lowerUpper and lower
Hypertrophy daysUpper, then lowerBack and shoulders, then legs, then chest and arms
Hypertrophy reps8 to 12 on most lifts8 to 20
Speed workNoneEach hypertrophy day opens with 6 sets of 3 at 65 to 70% of your 3 to 5 rep max

PHAT details are from Norton’s own write-up. If four days suits you better than five, PHUL covers the same ground with less time in the gym. For a plain four-day split without separate power and hypertrophy days, see the upper lower split.

// IN IRONLEDGER //

Two ways to run it.

Both are on the Templates screen and both run the four sessions above. They differ in who picks the weight.

PHUL: load and go

Tap LOAD. Four weeks of the four sessions, which then start again from week one; the app shows the next session whatever day you train. The main lifts start from a preset load unless you already have history for them, so change them to yours on day one.

After that it recommends each next load from what you logged and shows the reason, using the rule written out here.

PHUL: set it up

Tap SET UP. Pick your four days, conventional or sumo deadlifts, a front, hack or high-bar squat on the hypertrophy day, and standard or extra arm work. Extra arms adds hammer curls and weighted dips to upper power, and concentration curls and overhead dumbbell extensions to upper hypertrophy. It runs for six weeks.

There are no starting numbers: each lift’s first session is marked as a first time and you choose the load. The app does not work out the next weight; add load when you reach the top of the rep range.

Both versions

Sets are written at the low end of each of Campbell’s ranges and every lift targets RIR 1 to 2. Campbell’s program runs for 12 weeks; the load-and-go version repeats every four weeks and the set-up version runs for six. Every set logs weight, reps and RPE or RIR.

// DIRECT ANSWERS //

Questions lifters ask.

What is PHUL?

PHUL stands for Power Hypertrophy Upper Lower. It is a four-day program: an upper and a lower power day with 3 to 5 reps on the main compound lifts, then an upper and a lower hypertrophy day at 8 to 12 reps. Every muscle is trained twice a week.

Who created PHUL?

Brandon Campbell, who published it on Muscle & Strength in February 2013 (last updated May 2021). He lists it for intermediate lifters as a 12-week, four-day program with sessions of 45 to 60 minutes.

Is PHUL good for beginners?

It is usually a second program rather than a first. The American College of Sports Medicine suggests 2 to 3 training days a week for novices and 3 to 4 for intermediate lifters, with a wider range of loads as training progresses. Brandon Campbell lists PHUL for intermediate lifters, and so does IronLedger.

What is the difference between PHUL and PHAT?

PHAT, Layne Norton’s Power Hypertrophy Adaptive Training, runs five days: an upper and a lower power day, then three hypertrophy days split by body part, each opening with speed sets of a power lift. PHUL runs four days, splits its hypertrophy days into upper and lower, and has no speed work.

Is PHUL good for building muscle?

Yes. It trains each muscle twice a week, and a 2017 meta-analysis found muscle growth was similar across light and heavy loads when sets were taken close to failure, while heavy loads built more maximal strength. PHUL uses both.

Can I run PHUL three days a week?

Yes, by rotating the four sessions over three days, so each one comes round a little less often. IronLedger gives you the next session in order rather than by weekday, so this works without changing the program.

Does IronLedger set the weights for me?

In the load-and-go version, yes: the main lifts start from a preset load unless you already have history, and after that the app recommends each next load. In the version you set up yourself, you choose every load.

How the next load is chosen

On the load-and-go programs, every recommended load comes with where it came from and the reason. The rule is written down in full, with examples.

Read the rule

// KEEP READING //

Related reading.

Four-day splits

PHUL, upper/lower and the other ways to train four days a week.

Hypertrophy vs strength

What changes when you train for size or for strength, and how to do both.

Push Pull Legs

Push, pull and legs on separate days, six days a week: all six workouts, with sets, reps and effort.

Arnold Split

Chest with back, shoulders with arms, then legs, twice a week: all three workouts, with supersets and pyramids.

Upper Lower Split

Upper body one day, lower body the next, four days a week: all four workouts, with sets, reps and effort.

Starting Strength

Mark Rippetoe’s novice barbell program from the book: its stages, work sets and weight jumps, and workouts A and B as IronLedger runs them.

Mike Mentzer Heavy Duty

Mentzer’s high-intensity routine in his own words: two workouts every other day, a few sets to failure, pre-exhaust pairs.

Powerbuilding

Strength and size in one plan: heavy sets on the big lifts plus volume for growth, and three free programs built on it.

Dorian Yates Blood & Guts

Yates’s high-intensity method in his own words: two warm-up sets, then one all-out set to failure, on a four-day split.

StrongLifts 5x5

Two alternating full-body workouts, 5 sets of 5, three days a week, with a little more weight each time.

Greyskull LP

Johnny Pain’s linear progression: 2 sets of 5 and a set to failure, small jumps, and a planned reset when a lift stalls.

Madcow 5x5

The intermediate 5x5: medium, light and heavy days, sets that climb to a top set, and a new top set each week.

Texas Method

Volume Monday, light Wednesday, a new 5-rep max on Friday: the weekly program for lifters past novice gains.

GZCLP

Cody Lefever’s three-tier linear progression for newer lifters, with its built-in plan for stalls.

nSuns 5/3/1 LP

High-volume 5/3/1-style training, nine top sets and back-off sets a day, with a weekly training max increase.

Smolov and Smolov Jr

A squat specialisation block of about 13 weeks, and its three-week short version, from your max.

Sheiko Beginner

Three days a week of squat, bench press and deadlift at moderate percentages of your max, in preparation and competition blocks.