// FREE PROGRAM //

StrongLifts 5x5 Program

StrongLifts 5x5 is two full-body barbell workouts, done alternately three times a week, adding a little weight each time. Enter your starting weights to get it as a file you can import into IronLedger.

Workouts A and BFor new lifterskg or lbFree import file
Unit
kg

New lifters start with the empty bar; others with a weight they could lift for 10 reps.

kg
kg
kg

The guide suggests 30 to 40 kg (65 to 95 lb) for new lifters.

kg

The guide suggests 30 to 40 kg (65 to 95 lb) for new lifters.

kg
kg
kg

The guide says men can usually add 10 lb for a few weeks, then 5 lb.

// THE WORKOUTS //

Two workouts, alternated.

Three workouts a week with at least a day off between them, alternating A and B. The guide says most people train Monday, Wednesday and Friday, and that two a week also works.

StrongLifts 5x5 workouts A and B
Workout ASets × repsWorkout BSets × reps
Squat5 × 5Squat5 × 5
Bench press5 × 5Overhead press5 × 5
Barbell row5 × 5Deadlift1 × 5

5 × 5 means five sets of five reps with the same weight, resting about three minutes between sets. The deadlift is one heavy set of five after your warm-up sets.

// WEIGHTS //

Start light, add a little.

New lifters start light so there is room to progress; if you have lifted before, start with a weight you could lift for 10 reps.

StrongLifts starting weights for new lifters, and the increase per workout
LiftNew lifter starts atAdd each workout
SquatEmpty bar (20 kg / 45 lb)2.5 to 5 kg (5 to 10 lb)
Deadlift30 to 40 kg (65 to 95 lb)2.5 to 5 kg (5 to 10 lb)
Bench pressEmpty bar1.25 to 2.5 kg (2.5 to 5 lb)
Overhead pressEmpty bar1.25 to 2.5 kg (2.5 to 5 lb)
Barbell row30 to 40 kg (65 to 95 lb)1.25 to 2.5 kg (2.5 to 5 lb)

Begin with the small jump

The guide starts with 5 lb (2.5 kg) on the squat, bench, press and row. Men can usually add 10 lb (5 kg) to the deadlift for a few weeks, then 5 lb.

Not every workout

Half the jump, or a jump every two or three workouts, still counts. The point is to lift more over time, not to add weight at any cost.

Planned as if nothing stalls

The file adds weight every time a lift comes round, so it is right until your first miss. The repeat and deload rule is in each row’s notes for you to apply.

// WHEN YOU FAIL //

Repeat, then deload.

Repeat the weight

Miss a rep and you repeat that weight next workout, on that exercise only. A lift you completed still goes up.

Three misses, take 10% off

If you repeat a weight three workouts running and still can’t get 5 × 5, reduce it by about 10% and work your way back up.

Then what?

When progress slows for good, StrongLifts points to intermediate programs such as Madcow 5x5. The Texas Method is another common next step.

// WHERE 5X5 COMES FROM //

Older than the name.

The StrongLifts guide is candid that nobody knows who invented 5x5.

Reg Park, 1958

The first person known to write about 5 × 5, as Arnold Schwarzenegger’s mentor Reg Park did in 1958, by the guide’s history.

Bill Starr, 1976

His book The Strongest Shall Survive used 5 × 5 for football players, with heavy, light and medium days and weights that climbed set by set.

StrongLifts, 2007

Mehdi Hadim found 5 × 5 in 2003 and wrote the guide that became StrongLifts 5x5 in 2007, with straight sets and two alternating workouts.

// IN IRONLEDGER //

What the app does with it.

An import file

The app lists a StrongLifts 5x5 template as coming soon. Until it ships, this file is how to run it: each workout, set and starting weight, with the rule for misses in the notes.

No automatic changes

An imported program keeps the loads the file sets. For a novice program with load recommendations built in, see Starting Strength.

Check it yourself

The file is checked with the app’s own import rules before you download it. Paste it into the program file checker to see every row.

// WITH YOUR AI //

Customise it in a sentence.

Here is my StrongLifts 5x5 program as an IronLedger import file. Keep the same columns and the Week and Day numbering. [Say what to change, such as smaller jumps on the press, or repeating a weight I missed.] Check the result with the check_program_file tool on the IronLedger MCP server and fix anything it reports, then give me the whole file to save as “StrongLifts 5x5.csv”.

[Paste the file here]

Connect your assistant to IronLedger first so it can check its work: setup steps for each AI app. StrongLifts is Mehdi Hadim’s program and brand; IronLedger isn’t affiliated with StrongLifts.

// DIRECT ANSWERS //

Questions lifters ask.

What is StrongLifts 5x5?

A beginner strength program by Mehdi Hadim: two full-body barbell workouts, A and B, done alternately three times a week. Workout A is squat, bench press and barbell row; workout B is squat, overhead press and deadlift. Everything is 5 sets of 5 except the deadlift, which is one heavy set of 5.

What is a 5x5 workout?

Five sets of five reps of a lift, usually with the same weight on every set, and a little more weight next time. The StrongLifts guide traces it to Reg Park, who wrote about it in 1958, and Bill Starr, whose 1976 book The Strongest Shall Survive used it for football players.

How much weight do you add each workout?

The guide starts with 5 lb (2.5 kg) a workout on the squat, bench, press and row, and says men can usually add 10 lb (5 kg) to the deadlift for a few weeks. It also says you don’t have to add weight every workout: half the jump, or a jump every two or three workouts, still counts.

What do you do when you fail a set?

Repeat the same weight next workout, on that exercise only. If you repeat it three workouts running and still can’t get 5 × 5, take about 10% off and work back up, the guide’s deload.

What weight should I start StrongLifts with?

If you have never lifted, the empty bar on the squat, bench and overhead press, and 30 to 40 kg (65 to 95 lb) on the row and deadlift, bar included. If you have lifted before, the guide says to start with a weight you could lift for 10 reps.

How is StrongLifts different from Starting Strength?

Both are novice barbell programs that alternate two workouts. StrongLifts does 5 sets of 5 and uses the barbell row; Starting Strength does 3 sets of 5 and, in its later stages, the power clean. IronLedger has Starting Strength built in with load recommendations; StrongLifts is an import file.

Will IronLedger repeat the weight or deload me automatically?

No. An imported program keeps the loads the file sets; live load recommendations run only on the app’s five built-in load-and-go programs. The repeat and deload rule is in each row’s notes. When you miss, edit that row, or change your numbers here and import the file again with the same name to update the program in place.

Customise it with your AI

Paste the file into Claude, ChatGPT or Gemini with the prompt on this page. Connected to the IronLedger MCP server, your assistant can check its changes with the program file checker before it gives the file back.

Set up your AI

// MORE PROGRAMS //

More free programs.

Push Pull Legs

Push, pull and legs on separate days, six days a week: all six workouts, with sets, reps and effort.

Arnold Split

Chest with back, shoulders with arms, then legs, twice a week: all three workouts, with supersets and pyramids.

Upper Lower Split

Upper body one day, lower body the next, four days a week: all four workouts, with sets, reps and effort.

PHUL

Brandon Campbell’s Power Hypertrophy Upper Lower: two heavy days and two size days a week, all four workouts, and how PHUL differs from PHAT.

Starting Strength

Mark Rippetoe’s novice barbell program from the book: its stages, work sets and weight jumps, and workouts A and B as IronLedger runs them.

Mike Mentzer Heavy Duty

Mentzer’s high-intensity routine in his own words: two workouts every other day, a few sets to failure, pre-exhaust pairs.

Powerbuilding

Strength and size in one plan: heavy sets on the big lifts plus volume for growth, and three free programs built on it.

Dorian Yates Blood & Guts

Yates’s high-intensity method in his own words: two warm-up sets, then one all-out set to failure, on a four-day split.

Greyskull LP

Johnny Pain’s linear progression: 2 sets of 5 and a set to failure, small jumps, and a planned reset when a lift stalls.

Madcow 5x5

The intermediate 5x5: medium, light and heavy days, sets that climb to a top set, and a new top set each week.

Texas Method

Volume Monday, light Wednesday, a new 5-rep max on Friday: the weekly program for lifters past novice gains.

GZCLP

Cody Lefever’s three-tier linear progression for newer lifters, with its built-in plan for stalls.

nSuns 5/3/1 LP

High-volume 5/3/1-style training, nine top sets and back-off sets a day, with a weekly training max increase.

Smolov and Smolov Jr

A squat specialisation block of about 13 weeks, and its three-week short version, from your max.

Sheiko Beginner

Three days a week of squat, bench press and deadlift at moderate percentages of your max, in preparation and competition blocks.